RC300 Rotory Cut Off

The Mill Masters RC300 Rotary Cut Off Machine is designed for cutting flat oval shaped tubes inline with a high-speed tube mill. Utilizing Mill Masters proprietary software designed to control the mechanical components, the RC300 offers excellent cut quality.

The tubes are cut using a precision blade as it passes through the cut off die set. The blade is mounted on a rotating cutter arm driven by a servomotor.

The blade passes through the tube at an extremely high speed resulting in a very short cutting time. The tube cut length is adjustable on the fly while the machine is in operation. All functions are controlled via a touch screen terminal mounted directly at the cut off machine.

Included with the RC300 Rotary Cut Off Machine is a 6’ (1.8 meter) long exit conveyor. The conveyor is supported by the cut off base to help cut tubes exit the cut off area. This conveyor is also equipped with a reject gate activated by the non-destructive test unit to deflect faulty tubes into a separate holding bin.

Note: Each Tube size to be produced requires one cut off die set assembly.

Cutoff Machine Specifications:

Material:                      Aluminum

Hardness:                    H24

Thickness:                   0.24 mm to 0.04 mm

Tube Cut Length:         101 mm – 1080 mm (± 0,5 mm)

Tube Height: max.:      80 mm

Tube Widths: max.:     10 mm

Max. Tube Speed:        150 m/min.

Cuts/minute:               600 max. Length Tolerance ± 0,5 mm

Air Pressure:               4 bars, 19mm hose

Power Supply:             480 volt

Power Consumption:   25 Kva

Time for tool Changeover:  10 minutes

Documentation included:  Operating Manual, Safety Instructions, Maintenance Instructions, Spare Part List.